產品中心
PRODUCT CENTER
- 聯系人 : 曹鏡森先生
- 聯系電話 : 0769-82226193
- 傳真 : 0769-82226193
- 移動電話 : 13925217478
- 地址 : ** 廣東省東莞市大朗鎮仙村工業區
- Email : caojingshen@126.com
- 郵編 : 523792
- 公司網址 : http://www.tletools.com.cn
- MSN : caoshingcer@126.com
- QQ : 454992321
產品詳情
簡單介紹：
結晶機
從 150 到 4,000 dm33
適用于顆粒、片狀和再生材料
堅固可靠
均勻攪拌物料
詳情介紹：
From 150 to 4,000 dm3
- Suitable for granules, flakes and regrind materials
- Robust and reliable
- Homogeneous agitation of the material
立軸上不同槳組之間采用螺釘連接，以便于維護和更換單個槳。
整個過程由一整套溫度探頭和料位傳感器控制。
配置清理門，同時可選配可拆式的錐體（根據規格），方便清理。
結晶機可以用于處理片狀和顆粒料.
assures best crystallisation, improving the drying phase. The design has been specifically developed to exceed the material glass transition temperature and to guarantee homogeneous crystallization, assuring optimal flow of the material.
Crystallising hoppers are equipped with high efficiency planetary motor gears to guarantee low rotation speed of the vertical paddle shaft and minimize dust creation.
The vertical shaft is assembled with screw connections between the different paddle groups, in order to facilitate maintenance and the substitution of each single paddle.
The process is kept under control with a complete set of temperature probes and level sensors.
The access to the inner part is facilitated by a large hinged and insulated door and by the removable cone (configuration according to size).
crystalliser can run both with flakes and granules.
